Expert Bosch Cooktop Repair
Repair for Bosch Benchmark and 800 Series induction, gas, and electric cooktops. FlexInduction zone diagnostics, PreciseSelect touch controls, inverter board and power supply repair, and glass surface replacement.
Service call fee waived with completed repair
12-month warranty
Genuine OEM Bosch parts 5.0/5
Google Rating
20+k
Appliances Serviced
10+k
Satisfied Customers
A Bosch cooktop with an induction zone that has gone dead, a gas burner that will not light, or a cracked glass surface can fail for reasons that share nothing, because gas and induction cooktops have almost no parts in common.
Bosch is best known for induction, and that is where the diagnosis is most brand-specific. FlexInduction lets you combine zones into one large cooking area or move a pan freely across it, which means a dead spot can be a single coil or an inverter section rather than the whole surface. PreciseSelect touch controls, the inverter boards, and the power supply are all electronic, so an induction fault is almost never a burner problem, and it needs Bosch’s diagnostic approach.
Gas cooktops fail differently, at the spark igniter, the gas valve, or a clogged burner port, and gas adds a safety dimension we treat with care. Electric radiant cooktops fail at the element or the glass. And because Bosch shares the BSH platform with Thermador, many parts and codes carry over, though the glass surfaces are not interchangeable between the two. We identify the technology and the exact fault before ordering a part.
Bosch Cooktop Models We Repair
We service every Bosch cooktop, from Benchmark and 800 Series induction to gas and electric radiant.
-
Bosch Benchmark & 800 Series Induction Cooktops
FlexInduction zones with PreciseSelect touch controls. Service covers the induction coils, inverter boards, power supply modules, and touch sensors.
-
Bosch FlexInduction Cooktops
Models that combine two zones into one large cooking area for oversized cookware. A dead spot usually points to one coil or inverter section, which we map and replace on its own.
-
Bosch Gas Cooktops
Sealed-burner gas cooktops with cast-iron grates and a low-simmer burner. Service covers spark igniters, gas valve assemblies, and burner port cleaning.
-
Bosch Electric Radiant Cooktops
Glass-ceramic cooktops with radiant elements. Service covers the elements, the infinite switches or touch controls, and glass surface replacement.
Common Bosch Cooktop Problems We Diagnose and Fix
Gas, induction, and electric surfaces fail in different ways. Here is what each symptom usually points to.
Induction Zone Dead or Not Detecting Cookware
A dead or flickering zone points to an inverter board, a coil, or the power supply. A zone that will not detect a pan can be non-compatible cookware. On FlexInduction, a dead spot is often one coil, not the whole surface. We confirm with known-good cookware, then map the electronics.
Gas Burner Not Igniting or Clicking
A burner that clicks without lighting points to a clogged port, a misaligned cap, a worn spark igniter, or the spark module. If several burners will not light at once, the spark module is the likely cause.
Touch Controls (PreciseSelect) Not Responding
A dark or unresponsive panel can be a failed touch sensor, moisture trapped under the glass, or a control fault. We isolate the control from the surface before replacing the panel.
Cracked or Damaged Glass-Ceramic Surface
The glass top on induction and electric cooktops is a replaceable, model-specific part, and a Bosch top is not interchangeable with a Thermador even though both are BSH. We source the OEM glass and reinstall without damaging the countertop.
Error Code or Power Supply Fault
An induction error code points to the inverter, a coil, or the power supply module, which Bosch units are particularly sensitive to. We read the code, then test the supply and boards directly.
Burner Will Not Turn Off or Stays on High
A gas burner stuck on, or an induction zone that will not drop from high, is a safety concern, usually a failed gas valve or a control-sensor fault. We treat it as urgent and repair it to spec.
Induction Zone Dead or Not Detecting Cookware
A dead or flickering zone points to an inverter board, a coil, or the power supply. A zone that will not detect a pan can be non-compatible cookware. On FlexInduction, a dead spot is often one coil, not the whole surface. We confirm with known-good cookware, then map the electronics.
Gas Burner Not Igniting or Clicking
A burner that clicks without lighting points to a clogged port, a misaligned cap, a worn spark igniter, or the spark module. If several burners will not light at once, the spark module is the likely cause.
Touch Controls (PreciseSelect) Not Responding
A dark or unresponsive panel can be a failed touch sensor, moisture trapped under the glass, or a control fault. We isolate the control from the surface before replacing the panel.
Cracked or Damaged Glass-Ceramic Surface
The glass top on induction and electric cooktops is a replaceable, model-specific part, and a Bosch top is not interchangeable with a Thermador even though both are BSH. We source the OEM glass and reinstall without damaging the countertop.
Error Code or Power Supply Fault
An induction error code points to the inverter, a coil, or the power supply module, which Bosch units are particularly sensitive to. We read the code, then test the supply and boards directly.
Burner Will Not Turn Off or Stays on High
A gas burner stuck on, or an induction zone that will not drop from high, is a safety concern, usually a failed gas valve or a control-sensor fault. We treat it as urgent and repair it to spec.
Why High-End Freezer Repair Requires a Specialist
Daily work with high-end brands — not occasional exposure
Accurate diagnosis before any part is ordered
Upfront pricing — you approve the quote before we begin
12-month warranty on parts, 6 months on labor
Licensed and insured in California
Service call fee waived with completed repair
view all questions
Frequently Asked Questions
Have Questions About Your Repair?
Call us or schedule your service - we'll guide you
and get your appliance fixed quickly
What is Bosch FlexInduction, and how does a repair work?
FlexInduction is Bosch's flexible induction design. Instead of fixed round zones, it links induction coils so you can combine two zones into one large cooking area or slide a pan anywhere across the flex zone and have it keep heating. For a repair, that layout means a fault is usually localized: one section going cold points to a specific coil or an inverter section, not the whole cooktop. We map the surface to find which coils have failed and replace only that section, rather than the entire unit.
Why is my Bosch induction cooktop zone dead or showing an error?
A Bosch induction zone that goes dead, flickers, or throws an error is an electronic fault, not a burner problem. Each zone runs on an induction coil driven by an inverter board and a power supply module, and when a coil, an inverter, or the supply fails, that zone stops heating while the rest of the surface works. Bosch induction cooktops are also sensitive to the incoming power supply, so we test the power supply module and the inverter boards, not just the coil, before replacing a part.
Can a cracked Bosch cooktop glass surface be replaced?
Yes. The glass-ceramic surface on Bosch induction and electric cooktops is a replaceable part, but it is model-specific: a Bosch top is not interchangeable with a Thermador even though both are BSH brands. Replacement means lifting the cooktop from the countertop cutout, disassembling the frame, fitting the new OEM surface, and reinstalling without damaging the surrounding stone or cabinetry. We source the OEM glass whenever it is available for your model.
Are Bosch and Thermador cooktops the same to repair?
They share the BSH platform, so their induction electronics, controls, and many parts overlap, and the diagnostic approach carries over. The main practical difference for a cooktop is the glass surface and some feature calibration: Thermador adds its Freedom full-surface induction and Star Burner gas designs, while Bosch uses FlexInduction and sealed gas burners, and the glass tops are not interchangeable between them. We service both and identify which platform features your model uses before diagnosing.
Need Reliable Cooktop Repair Today?
Speak directly with a technician and get fast, precise service backed by warranty.
